Features
- Made from 20MnCr5 & Case Hardened to 55-58 HRc approx.
- Precision ground to an Accuracy of 0.015 mm TIR.
- For best result : Always insist on Trumil make Collets.
- Use C Hook Spanner to avoid breakages.
- Suitable for both Tail & Schaublin type Collets.
| MODEL NO. | SHANK TAPER | SUITABLE FOR COLLET | L mm | L1 mm | ØD mm | M |
|---|---|---|---|---|---|---|
| ISO - 30 E - 32 | ISO - 30 | E- 32 | 68.4 | 68 | 50 | M12 |
| ISO - 30 E - 40 | ISO - 30 | E- 40 | 68.4 | 90 | 63 | M12 |
| ISO - 40 E - 32 | ISO - 40 | E- 32 | 93.4 | 40 | 50 | M16 |
| ISO - 40 E - 40 | ISO - 40 | E- 40 | 93.4 | 55 | 63 | M16 |
| ISO - 40 E - 45 | ISO - 40 | E- 45 | 93.4 | 65 | 68 | M16 |
| ISO - 50 E - 40 | ISO - 50 | E- 40 | 126.8 | 55 | 63 | M24 |
| ISO - 50 E - 45 | ISO - 50 | E- 45 | 126.8 | 60 | 68 | M24 |
ORDRE BY - MODEL No. Eg. Milling Collet Adaptor ISO - 40 E - 40.